HOW TO USE SMARTPHONE FLASH TOOL (SP TOOL)
SP flash Tool is a handy flashing Software that tin live on used to restore a bricked MTK Android Device similar Infinix Tecno, Gionee, Wiko, Lenovo, Oppsson, ZTE Blackview Etc. it supports well-nigh all Android Phones that run on MediaTek Chipset, different other tools that perform a similar task, SP Flash tool is basically gratuitous as well as it requires neither a Box nor dungle to commencement working, all you lot demand is to convey the Software installed on your PC.
Bricked Phones that are non coming on or non booting into recovery means could easily live on unbricked alongside this tool, other functions similar the clearing of user Data, Resetting as well as Formatting of MTK Based Device could also live on achieved alongside SP tool.
Get started yesteryear next the footstep yesteryear footstep instructions I convey provided below.
How to Flash/Restore an Android Phone alongside SP Flash Tool
Requirement
• A PC.
• USB Data Cable.
• Install the latest SP Flash Tool Software.
• Install VCOM Driver on the PC - Download Drivers Here
• The Phone you lot wishing to Flash.
• File to live on Flashed - Download Gionee - Tecno - Infinix - Firmware
• Difficulty Level – Medium.
• USB Data Cable.
• Install the latest SP Flash Tool Software.
• Install VCOM Driver on the PC - Download Drivers Here
• The Phone you lot wishing to Flash.
• File to live on Flashed - Download Gionee - Tecno - Infinix - Firmware
• Difficulty Level – Medium.
Procedure
1. Power off the Phone you lot wishing to flash (if your Battery is Non-removable), take the Battery as well as position it dorsum (if your battery is removable) but don’t press the boot/on button. Also, ensure there’s a formatted SD bill of fare inwards the Phone (If it has SD Card Slot).
2. Launch SP Flash Tool every bit Administrator
3. Navigate to the top correct as well as click on Scatter-Loading
4. In the window that popular upward navigates to the folder, you lot saved your telephone scatter file as well as direct it. (Scatter File is a text file alongside .txt extension as well as the discussion “Scatter ” inwards it name).
5. Influenza A virus subtype H5N1 listing alongside ticked boxes should seem inwards SP Flash tool (PRELOADER, MBR, EBR1, UBOOT etc.)
7. To manually add together an special that is non gets ticked automatically afterward loading the Scatter File, follow these steps. Tick the box inwards forepart of that item, double-click its place as well as direct the corresponding file inwards the window that pops up.
8. When you lot convey ticked all the files you lot wishing to flash, click download or press CTRL + D.
9. At this point, all pick would live on delisted except goal Button.
10. Connect your telephone via USB Cable (with its Battery Inside).
11. At the Bottom right, a progress bar would start to run.
12. Do non interrupt the process.
13. Be patient on till you lot larn a success Message (A light-green Cycle alongside OK)
14. Disconnect the Phone from the USB Cable, take the Battery for 10 seconds (if removable), reinsert the battery as well as ability upward the Phone.
15. Finally, become to recovery means as well as produce a manufactory reset to clear whatever error.
Congratulations !!
