Before Flashing your Galaxy J1
Before anything else, we strongly recommend to back up first all your important data in your phone like your contacts, photos, messages, files and all your installed third party application will be deleted also. Make sure also that your phone model is exact as the image below, flashing incorrect firmware may cause some other software problem.
 |
| Before downloading the firmware below, your phone MOdel at the back of your phone should be look like this. phone model MUST BE SM-J100ML/DS |
DO IT AT YOUR OWN RISK
We do not recommend you to flash if you just want to try flashing or just want to try is there is something new, Unless your phone encountered software problem.
DOES GALAXY J1 IS SAFE TO FLASH FIRMWARE?
Many J1 users encounter a dead boot after flash, because either they flash incorrect firmware, followed incorrect procedure, Interrupt during flashing and due to hardware problem. So, we share the TESTED Firmware for you to less worry about flashing. as long as you follow the instruction, Its gonna be fine.
Samsung Galaxy J1 SM-J100ML/DS Firmware Download
How to Flash Samsung Galaxy J1 Using Odin
- Open Odin included in firmware link
- Reboot Phone in Download Mode (Press and hold Home + Power + Volume Down buttons)
- Connect phone and wait until you get a blue sign in Odin, Let driver install if needed
- Add the four firmware file as you see in the screenshot below
- Make sure re-partition is NOT ticked
- Click the start button, to start flashing
- Wait until you see PASS!
